Fires pins straight into concrete and steel — no drilling, no anchors, no plugs.

Gas-actuated fastening for metal framing and commercial drywall track. Hold it against the track, pull the trigger, done. Where a hammer drill and anchor takes a minute per fixing, this takes a second, and there's no dust and no pre-drilling.

30% more power than the tools it replaces, and the .125 inch pin is engineered for the hard concrete where ordinary pins fold over or bounce. With the 1/2 inch steel pin it will fire into the web of a steel beam.

Magazine holds 45 pins. Battery lasts around 9,000 shots, so it's a charge per job rather than per wall.

The nose is tapered specifically to reach into deep-leg track, internal corners and tight spaces — the places where you otherwise end up drilling by hand because nothing else fits.

Lithium-ion powered: no compressor, no hoses, no cords. 17 inches long, 16-1/4 inches tall, 8.4 lb. Rated to work from -15°C to 48°C, so it functions in an unheated shell in winter.

Not included: pins and fuel cells. These are consumables and you buy them to suit the job — pin length depends on your track gauge and base material. Order them ahead; the tool does nothing without both.

Gas-actuated tools are regulated in some jurisdictions and require training to operate safely. Please make sure you're qualified before booking.